YAW-300D Electric Computer Control Pressure Testing Machine
YAW-300 Electro-Hydraulic Servo Computer Control Pressure Testing Machine
April 23, 2017
YAW-2000/3000 Electro-Hydraulic Servo Computer Control Pressure Testing Machine
April 23, 2017
The YAW-300D Electric Computer Control Pressure material testing machine is made to meet the requirements of cement compression and bending tests from GB / T17671-1999 'cement mortar strength test method' and 'GB10238-200 oil well cement'.
YAW-300D Electric Computer Control Pressure Testing Machine Product Information 61.84 KB
- The material test machine adopts the double column frame structure, the upper pressure plate is mounted on the upper fixed beam, the lower pressure plate loads the sample from downside when the precision ball screw is driven.
- The AC servo control and transmission system are installed in the lower part of the mainframe. The testing machine uses AC servo speed control system, drives the precision ball screw to test, to achieve a large range of test speed adjustment. The test process is smooth and efficient.
- The machine is controlled by computer, has the control modes of constant speed force, constant speed stress and force holding. It provides precise test results.
- The test machine uses computer to control and display the test force, test force peak and other information, with a nice and neat interface.
- The test machine uses AC servo system to drive AC servo motor, reduce the speed to drive ball screw by the precision reducer, to ensure the entire equipment run smoothly with high precision and low noise.
- Count and process the test data, print the test curve and report under various requirements, can achieve storage and networking functions.
- The machine has strong extensibility. It can accomplish the compression test of other materials with additional attachments.
- The testing machine can Independently complete the test parameter setting, test process control, data acquisition, processing, analysis and display. Single piece test and group test are both available.Control and measurement is precise, accurate, fast, convenient and reliable.
- The YAW-300D electric pressure material testing machine has the function of returning to the initial position after the test. It is efficient and fast.
- It has the reliable and safety feature of limiting protection at any working position, and overload, overcircuit protection.
- Both the servo motor and the servo reducer have the complete mechanical and sealed structure. No need to replace the lubricating oil during working, to avoid the oil leakage problem known to hydraulic test machine. No pressure oil leakage and proportional valve blockage either, it is designed to keep the laboratory environment clean.
- The material testing machine uses normal 220V power supply is eliminating the inconvenience from the old requirement of 380V power supply wiring.
- Equipped with renowned computer and printer to ensure high performance and efficiency.
| Testing Item | Specification |
|---|---|
| Maximum Compression Force | 300kN |
| Maximum Bending Force | 10kN |
| Tester Accuracy Grade | ±1% |
| Compression Test Range | (3-300)kN |
| Bending Test Range | (0.1-10)kN |
| Compression Minimum Display Force Value | 0.01kN |
| Bending Minimum Display Force Value | 0.1N |
| Compression Loading Rate | (0.2-5)kN/S |
| Bending Loading Rate | (10-100)N/S |
| Distance between the Compression Bearing Plates | 200mm |
| Bearing Plate Diameter | 150mm |
| Maximum Piston Stroke | 100mm |
| Power Voltage | AC 220V±10% 50Hz |
| Working Power | 1kw |
| Tester Overall Dimensions | 630x400x1530mm |
| Tester Weight | 350kg |
