WDW-1/2/5 Electronic Computer Control Universal Testing Machine

MGW-5000 static anchoring testing machine
MGW Series Electro-Hydraulic Servo Static Load Anchoring Testing Machine
April 22, 2017
WDW-100 electronic universal testing machine
WDW-100 Electronic Computer Control Universal Testing Machine
April 23, 2017

WDW-1/2/5 Electronic Computer Control Universal Testing Machine

WDW-5 electronic universal testing machine
 
The WDW-1/2/5 series computer control electronic universal testing machine (single arm structure) is mainly used for testing the mechanical properties of various metals, non-metallic materials and composite materials in tension, compression and bending tests.
 
  • With the precise automatic control and data acquisition system, our WDW-1/2/5 Electronic Computer Control Universal Testing Machine achieves the fully digital adjustment in the process of data collection and control.
  • In the tensile test, the universal testing machine measures the maximum bearing force, tensile strength, extended deformation and elongation rate of the test material.
  • It can achieve a variety of programming control modes as constant rate of force control, constant rate of stress control, constant rate of distortion control, constant rate of strain control, constant rate of process control, constant loading speed control, constant speed control on extension, constant speed control on displacement, low-cycle control and user programming control.
  • When the test is finished, the machine is returning to the original position, manual reset is not needed.
  • It has a strong testing database, all the data can be saved, searched and summoned at any time.
  • The WDW-1/2/5 Computer Control Universal Testing Machine is featured with remote control box, which can adjust the fast/slow mode of the beam, and can be flexibly switch in between the two modes.
  • Can switch to display a variety of test curves: stress-strain curve, force-deformation curve, force-displacement curve, force-time curve, deformation-time curve, displacement-time curve, stress-strain curve. Have the function of test curves partial enlargement and multi-curve stack comparison.
  • The above measurement parameters are automatically calculated by the computer according to test parameter conditions set initially, and therefore the corresponding test results are displayed. When the test is finished, the measurement parameters can be displayed and also be printed out when the printer is connected.
  • It has reliable safety precaution of limiting protection at any working position, and protection for loading and circuit.
Testing ItemSpecification
Maximum Force1kN/2kN/5kN
Testing Force Resolution1/200000
Minimum Deformation Indication0.01mm
Relative Error of Indication1%-100% within the testing span ±1%
Relative Error of Testing Force Value Repeatity≤1%
Relative Error of Testing Force Zero Point±0.1%
Speed Range0.005-500mm/min
Testing Space800mm
Load MethodElectromotion
Power Voltage~220V±10% 50Hz
Tester Overall Dimensions650x500x1650mm
Tester Weight150kg